Professional grade.
This Professional Body Pack Wirelss system comes complete with a Bodypack, and receiver, and a WB98H/C Microphone. Ideal for micing instruments (brass, percussion, woodwinds, strings), the gooseneck WB98H/C Microphone even comes with a brace for optimal sound quality.
Order today and enjoy the best in wireless.
Detailed Product Description
Shure ULXP14/98H-
ULXP Receiver
Step up to ULX Professional wireless, UHF systems for working musicians and professional sound installers. Multiple system configurations provide limitless options, each with a choice of legendary Shure microphones. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel. ULX Professional systems offer more advanced features and controls, including lockable settings and group scan function.
WB98H Microphone
The Shure Beta 98H/C (also available as the WB98H/C for use with wireless systems) is a premium cardioid condenser instrumental microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances. The Beta 98H/C features transformerless preamplifier circuitry, which improves linearity across the full frequency range. The pickup pattern of the Beta 98H/C provides high gain-before-feedback and excellent rejection of unwanted noise. Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.
Detailed Product Features
- ULXP4 Wireless Diversity Receiver
- Automatic Frequency Selection with group scan function
- Over 1400 selectable frequencies
- Predictive Diversity
- 5-segment transmitted audio signal strength meter
- 5-segment RF meter
- 3-segment transmitter battery fuel gauge
- Advanced multi-function LCD displays group and channel
- Mic/Line switch
- Remotable 1/2-wave antenna
- Frequency and volume lockout
- XLR and 1/4-inch output
- Rugged metal chassis
- 1/2 rack design
- ULX1 Wireless Bodypack Transmitter
- Three-segment battery fuel gauge
- Frequency and power lockout
- Flexible 1/4 wave antenna
- TA4F mini four-pin input connector
- Backlit LCD display shows group and channel setting
- Adustable audio gain control
- Input attenuation switch (selects 0 dB or -20 dB attenuation)
- PEAK icon appears when audio input overloads the transmitter
- Power on/off switch
- 8 hour battery life (9V battery)
- 300 foot (100m) operating range
- WB98H/C Clip-On Instrument Mic
- Tailored frequency response for studio quality performance
- Wide dynamic range for use in high SPL environments
- Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound
- Optional A98D drum mount is unobtrusive and versatile-allows precise positioning of the microphone while holding it firmly in place
- Compact design reduces stage clutter
- Detachable cable for easy storage
- Interchangeable microphone cartridges with different polar patterns are available
- Legendary Shure quality, ruggedness, and reliability
Detailed Product Specifications
- RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is
- used). Refer to the frequency supplement supplied with the system.
- Effective Range: 100 m (300 ft.) under optimal conditions (NOTE: Actual working range depends on RF signal absorption, reflection, and interference)
- Audio Frequency Response: 25 to 15,000 Hz, ± 2dB (NOTE: Overall system frequency response depends on the microphone element.)
ULXP4 Receiver Input - Connector: Antenna Power Input
- Connector Type: BNC IEC 320
- Actual Impedance: 50 Ohms
- Nominal Input Level: 95 to 30 dBm 15 VDC
- Maximum Input Level: +6 dBm ( 20 dBm recommended) 18 Vdc
- Pin Assignments: Shell = Ground Center = Signal IEC Standard
- Voltage for Remote Power: 12 Vdc, 150 mA maximum
ULXP4 Receiver Output - Connector: High Z Audio; Low Z Audio
- Output Configuration: High Z Audio Unbalanced (1/4 in.); Low Z Audio Balanced (XLR)
- Actual Impedance: High Z Audio 3 k0hms; Low Z Audio 22
- Nominal Input Level: High Z Audio Pin Assignments: Tip = Hot Ring/ Sleeve = Gnd: Low Z Audio 1 = Ground 2 = Hot 3 = Cold
- Voltage/Current/Phantom: Power Protection?: High Z Audio; Yes Low Z Audio Yes
Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive - voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
- Transmitter Gain Adjustment Range: ULX1: 25 dB
- Receiver Audio Output Level (± 38 kHz deviation, 1 kHz tone):
- XLR connector (into 600 ohm load): +3.9 dBV (line), 17 dBV (mic)
- 1/4 inch connector (into 3000 ohm load): 2 dBV
- Impedance
- ULX1 (input): 1 Megohm ULXP4 (output): 50 ohms at line level; 2000 ohms at mic level
- Modulation: ±38 kHz deviation compressor-expander system with pre- and de-emphasis.
- RF Power Output: ULX2: 30 mW maximum
- Dynamic Range: >100 dB, A-weighted
- RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)
- Image Rejection: 80 dB typical
- Spurious Rejection: 75 dB typical
- Ultimate Quieting (reference ± 38 kHz deviation): >105 dB, A-weighted
- System Distortion (reference ± 38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical
- Power Requirements: ULX2: 9V alkaline battery; 8.4 V Nicad optional; ULXS4: 14 - 18 Vdc (negative ground), 550 mA
- Battery Life: 8 to 9 hours (with 9V alkaline battery)
- Operating Temperature Range: - 20 degrees to 49 degrees C (- 4 degrees to 120 degrees F)
- NOTE: Battery characteristics may limit this range.
ULXP4 Dimensions (H x W x D): 1.72 in. x 8.56 in. x 6.88 in. (43 mm x 214 mm x 172 mm) - ULXP4 Weight: 2 lbs 7 oz. (1105 g)
ULX1 Dimensions (H x W x D): 3.86 x 2.68 x 1.10 in. (96.5 x 67 x 26.7 mm) - ULX1 Net Weight: 79 g (2.8 oz.) without battery
WB98H/C Clip-On Instrument Mic - Type: Condenser (electret bias)
- Frequency Response: 20 to 20,000 Hz
- Polar Pattern: Supercardioid (as supplied), uniform with frequency, symmetrical about axis. Cartridge for cardioid polar pattern also available.
- Output Level (at 1,000 Hz)
- Open Circuit Voltage: -59 dBV/Pa (1 mV) typical (1 Pa = 94 dB SPL)
- Maximum SPL (20 Hz to 20 kHz, less than 1% THD): 2.5 kilohm load: 160 dB; 1 kilohm load: 156 dB
- Preamplifier Output Clipping Level (20 Hz to 20 kHz, less than 1% THD): 2.5 kilohm load: + 6 dBV (2.0 V); 1 kilohm load: + 2 dBV (1.26 V)
- Dynamic Range (at 20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load): 125 dB (max SPL minus A-weighted noise)
- Output Noise: 35 dB SPL, A-weighted
- Signal-to-Noise Ratio: 59 dB re 94 dB SPL
- Output Impedance: Rated at 150 ohms (actual)
- Recommended minimum load impedance: 1 kilohm
- Hum Pickup: -7.5 dB equivalent SPL in 1 mOe field (60Hz)
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- Phantom Power: 48 Vdc ± 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3.
- Cable: 10 ft. cable terminated to 4-Pin Mini-Connector