Adds DSP to the 124C feature set.
Whether you're only mixing one microphone with a stereo source for the web, or multiple microphones and line sources for a live show, you want the highest performance, flexibility, and reliability available. Yamaha's MG-series mixers cover a wide range of applications from solo home recording to complex live sound with no compromises in sonic quality, processing versatility, or dependability.
Order today and make quality mixes.
Detailed Product Description
Features:- 12 input channels
- 6 Microphone preamps with Phantom Power
- Built-in Compression on channels 1-4
- 3-band EQ channels 1-8, 2-band EQ on 9-12
- 4-Buss configuration
- Stereo, Control Room, Monitor, and Headphone outputs
- Built-in SPX Effects
- Smooth 60-millimeter faders
Detailed Product Features
- 12-input, 4-bus design
- 4 channels of single-knob compression
- Built-in DSP for high quality effects
- 3-band EQ on inputs
- Illuminated Channel On/Off switches
Detailed Product Specifications
- Frequency Response: STEREO OUT, GROUP OUT, EFFECT/AUX (AUX1, 2*), SEND, MONITOR OUT, REC OUT: -3.0 1.0 dB
- Total Harmonic Distortion (THD + N) STEREO OUT, +14 dBu @ 20 Hz-20 kHz, Input GAIN Control at minimum : 0.1%
- Hum & Noise:
- CH INPUT 1-4 MIC, EIN (Equivalent Input Noise): Rs = 150 Ohms, GAIN: maximum: -128 dBu
- STEREO OUT & GROUP OUT, STEREO OUT, GROUP Master fader at nominal level
- and all channels' ST and 1-2 switches off: -88 dBu
- EFFECT/AUX (AUX1, 2*) SEND, Master EFFECT/AUX (AUX1, 2) control at nominal level and all CH EFFECT/AUX (AUX1, 2) controls at minimum.: -81 dBu
- STEREO OUT & GROUP OUT, STEREO, GROUP Master fader and one CH fader
- at nominal level: -64 dBu
- STEREO OUT Residual Output Noise -98 dB
- Crosstalk (1 kHz): Adjacent Input CH 1-4: -70 dB; Input to Output STEREO L/R, CH 1-4, PAN: panned hard left or right: -70 dB
- Phantom Voltage MIC: + 48V
- Input HPF: CH 1-7/8, 80 Hz, 12 dB/oct
- Input equalization CH 1-7/8 HIGH: 10 kHz (shelving), MID: 2.5 kHz (peaking), LOW: 100 Hz (shelving); CH 9/10-11/12 HIGH: 10 kHz (shelving), LOW: 100 Hz (shelving)
- PEAK Indicator: Red LED turns on when post EQ signal (either post MIC HA or post EQ signal for CH 5/6, 7/8) reaches -3 dB below clipping (+17 dBu).
- Internal Digital Effect* : 16 PROGRAM, PARAMETER control, Foot Switch (Digital Effect On/Off)
- LED Level Meter Pre MONITOR Level: 2 x 12 points LED meter (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB), PEAK lights if the signal level reaches 3 dB below the clipping level.
- Power Supply Adaptor PA-20: AC 35 VCT, 0.94 A, Cable Length = 3.6 m
- Power Consumption: 30 W
- Dimensions (W x H x D): 19.5" x 18.5" x 7.3" (346.2 mm x 86.1 mm x 436.6 mm)
- Weight: 16.5 lbs (3.2 kg)